Dell Networking S6000 System, Reference Manual

Page: 1100 / 1510

Related
Commands
show spanning-tree pvst — views the PVST+ configuration.
spanning-tree pvst err-disable
Place ports in an Err-Disabled state if they receive a PVST+ BPDU when they are members an untagged
VLAN.
S6000
Syntax
spanning-tree pvst err-disable cause invalid-pvst-bpdu
Defaults Enabled; ports are placed in the Err-Disabled state if they receive a PVST+ BPDU
when they are members of an untagged VLAN.
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced.
Usage
Information
Some non-Dell Networking systems which have hybrid ports participating in PVST+
transmit two kinds of BPDUs: an 802.1D BPDU and an untagged PVST+ BPDU.
Dell Networking systems do not expect PVST+ BPDU on an untagged port. If this
happens, Dell Networking OS places the port in the Error-Disable state. This
behavior might result in the network not converging. To prevent Dell Networking
OS from executing this action, use the
no spanning-tree pvst err-disable
command cause
invalid-pvst-bpdu
.
Related
Commands
show spanning-tree pvst — views the PVST+ configuration.
1100
Per-VLAN Spanning Tree Plus (PVST+)