Example (VLT)
Dell#show ip mroute vlt
IP Multicast Routing Table
Flags: S – Synced
(*, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Vlan 30
(50.1.1.2, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Usage
Information
The following describes the
show ip mroute
command shown in the following
example.
Field
Description
(S, G)
Displays the forwarding entry in the multicast route table.
uptime
Displays the amount of time the entry has been in the
multicast forwarding table.
Incoming
interface
Displays the reverse path forwarding (RPF) information
towards the source for (S,G) entries and the RP for (*,G)
entries.
Outgoing
interface list:
Lists the interfaces that meet one of the following:
• a directly connected member of the Group
• statically configured member of the Group
• received a (*,G) or (S,G) Join message
Example
Dell#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: GigabitEthernet 3/4
Outgoing interface list:
GigabitEthernet 3/12
GigabitEthernet 3/13
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/4
962
Multicast
Summary of Contents for Networking S6000 System
