Related
Commands
— enables the graceful restart maximum wait time
before a restarting peer comes up.
hello padding
Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON
or OFF for LAN or point-to-point hello PDUs.
S6000
Syntax
hello padding [multi-point | point-to-point]
To return to the default, use the
no hello padding [multi-point | point-
to-point]
command.
Parameters
multi-point
(OPTIONAL) Enter the keywords
multi-point
to pad only
LAN hello PDUs.
point-to-point
(OPTIONAL) Enter the keywords
point-to-point
to pad
only point-to-point PDUs.
Defaults
Both LAN and point-to-point hello PDUs are padded.
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1
Introduced on the Z9000.
Usage
Information
IS-IS hellos are padded to the full maximum transmission unit (MTU) size. Padding
IS-IS Hellos (IIHS) to the full MTU provides early error detection of large frame
transmission problems or mismatched MTUs on adjacent interfaces.
Related
Commands
— turns ON or OFF hello padding on an interface basis.
Intermediate System to Intermediate System (IS-IS)
811
Summary of Contents for Networking S6000 System
