clear ip rip
Update all the RIP routes in the Dell Networking OS routing table.
S6000
Syntax
clear ip rip
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the S-Series.
Version 7.6.1.0
Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
This command triggers updates of the main RIP routing tables.
debug ip rip
Examine RIP routing information for troubleshooting.
S6000
Syntax
debug ip rip [
interface
| database | events [
interface
] |
trigger]
To turn off debugging output, use the
no debug ip rip
command.
Parameters
interface
(OPTIONAL) Enter the interface type and ID as one of the
following:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
1162
Routing Information Protocol (RIP)
Summary of Contents for Networking S6000 System
