Parameters
mac
address
Enter the keyword
mac
then the MAC address of the host to
which the server is leasing the IP address.
vlan-id
vlan-id
Enter the keywords
vlan-id
then the VLAN to which the
host belongs. The range is from 2 to 4094.
ip
ip-address
Enter the keyword
ip
then the IP address that the server is
leasing.
interface
type
Enter the keyword
interface
then the type of interface to
which the host is connected.
• For an 10/100 Ethernet interface, enter the keyword
fastethernet
.
• For a ten-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
.
slot/port
Enter the slot and port number of the interface.
lease
time
Enter the keyword
lease
then the amount of time the IP
address is leased. The range is from 1 to 4294967295.
Defaults
none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the C-Series and S-Series.
Related
Commands
— displays the contents of the DHCP binding table.
1304
Security
Summary of Contents for Networking S6000 System
