Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-
channel 20 exclude-vlan 3
proxy-gateway peer-timeout
Configure the proxy-gateway VLT peer timeout value.
S6000
Syntax
[no] peer-timeout
value
Parameters
value
Enter the timeout value in seconds. The range is from 1 to
65535. The default is infinity.
Command
Modes
VLT DOMAIN PROXY GW LLDP
Command
History
Version 9.4(0.0)
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage
Information
In a square VLT topology with only one link connecting remote peers, a node must
stop sending its VLT peer MAC address ("vlt-peer-mac transmit" enabled) when the
VLT peer is down. If you configure this time out interval, it will keep sending its
peer's MAC address until the timer expires.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
vlt-peer-mac transmit
Configures a peer to sent its VLT peer's MAC address along with its LLDP TLV.
S6000
Syntax
[no] vlt-peer-mac transmit
Command
Modes
VLT DOMAIN PROXY GW LLDP
Command
History
Version 9.4(0.0)
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
VLT Proxy Gateway
1457
Summary of Contents for Networking S6000 System
