Copyright © 2020 WyreStorm Technologies | wyrestorm.com
SW-740-TX Quickstart Guide | 200729
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features before beginning the
installation process.
Basic Wiring Diagram
Tablet
Power
Supply
Multiroom Amplifier
Confidence Monitor
Control System
PIR Sensor
Personal Computer
RX-700
SW-740-TX
Interactive
Whiteboard
Short Throw
Projector
HDBaseT
Cat5e/6/7
Ethernet
USB
USB
HDMI
HDMI
Analog Audio
HDMI
IR
RS-232
RS-232
USB-C
USB Camera
KEY
HDMI/USB-C
HDBaseT/Ethernet
Control
Analog Audio
USB 2.0
4-input Desk-mounted 4K/60 HDBaseT Presentation Switcher
with DSC Compression, Scaling & USB Host
SW-740-TX
Quickstart Guide
IMPORTANT! Installation Requirements
• Read through the
section for important wiring
guidelines before creating or choosing premade cables.
• While this product supports CEC, WyreStorm cannot guarantee
compatibility with all forms of CEC communication.
• Visit the product page to download the latest firmware, document version,
additional documentation, and configuration tools.
Information and Parts Required for Installation
This transmitter requires connection via RS-232 or Ethernet in order to
configure functions such as EDID. Ensure that the following items are on hand
before proceeding with the installation.
• PC or Mac
• Telnet and Terminal software such as
• USB COM Port Adapter (Not Included)
• WyreStorm Part: CAB-USB-3PIN
• Network router and/or switch if using IP telnet for configuration.
• Latest version of the
SW-740-TX API
for advanced configuration not
covered in this document.
In the Box
1x SW-740-TX Presentation Switcher
2x 5-pin Terminal Block
3x 4-pin Terminal Block
1x 24V DC 6A Power Supply (US/UK/EU/AU)
2x Mounting Brackets
1x Quickstart Guide (This Document)
