- OR -
- OR -
Console
NVR
Router / switch
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 6 UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz, 2.5A)
C11-082-32-120 PoE Switch
Quick Installation Guide
The C11-082-32-120 is a 8xFE PoE + 2xGbE Combo Ex PoE switch capable of feeding 15.4/30W (56V max. per port)
power to Power over Ethernet (PoE) devices.
IMPORTANT
:
INTRODUCTION
LED DEFINITIONS
CONNECTION
* 1x PoE switch
* 1x Quick Installation Guide
* 2x rack mount ears
* 1x power cord (type by the shipped-to area)
PACKAGE CONTENTS
Rack-mounting
Connections
Use SFP, LC type transceiver with 100Mbps or 1Gbps transfer speed in Single mode (10km,30km,50km,80km) or Multi
mode (0.5m or 2km) or Bidi (10km,30km,50km,80km).
PWR
Green ON
Power is on and normal.
Green OFF
Power is off.
LAN
Green ON
Ethernet port is connected.
Blinking
Data is being transmitted and received.
Green OFF
No connection.
GbE
9,10
Green ON
Ethernet port is connected
Blinking
Data is being transmitted and received
Green OFF
No connection
PoE
Orange ON
Port is enabled and supplying power to connected device.
Blinking
An abnormal state, such as overload status, has been detected in the switch.
Orange OFF
Port has no active network cable connected, or it is not established a link to connected
device.
