Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 1235 / 1257

Body Electrical Control System: 10B-35
Junction block connector “K01”
Junction block connector “L04”
Junction block connector “L05”
Junction block connector “L06”
G34-11 WHT Hazard switch
10 – 14 V
Hazard switch is at ON position or lock or
unlock button of key less entry transmitter
(answer back control) is pushed
0 V Hazard switch is at OFF position
Terminal Wire color Circuit Normal voltage Condition
K01-5 WHT Interior light
10 – 14 V
Interior light switch is at DOOR position and
interior light is not lit up
0 V
Interior light switch is at DOOR position and
interior light is lit up
Terminal Wire color Circuit Normal voltage Condition
L04-2 YEL Air bag communication line
*0 – 1 V
np
4 – 6 V
(“Reference
waveform No.
13: ”)
Ignition switch is at ON position
L04-3 PPL/WHT
Serial communication line of
data link connector for ECM
10 – 14 V Ignition switch is at ON position
Terminal Wire color Circuit Normal voltage Condition
L05-4 BLK/ORN
Ground for body electrical
controller
0 V Ignition switch is at all positions
L05-5 YEL
Power supply for rear wiper
motor
10 – 14 V
Ignition switch is at ON position and rear wiper
motor is not in operation
0 V
Ignition switch is at ON position and rear wiper
motor is in operation
L05-8 BLK/RED
Rear end door window
defogger wire
10 – 14 V
Engine is running and rear end door window
defogger is in operation
0 V
Engine is running and rear end door window
defogger is not in operation
L05-9 ORN Rear wiper control
10 – 14 V
Ignition switch is at ON position and rear wiper
is not in operation
0 V
Ignition switch is at ON position and rear wiper
is in operation
Terminal Wire color Circuit Normal voltage Condition
Terminal Wire color Circuit Normal voltage Condition
L06-9 GRN
Rear right and left door lock
actuator motor (Unlock)
10 – 14 V
Rear right and left door lock actuator motor is
operated (Unlock)
0 V
Rear right and left door lock actuator motor is
not operated
L06-10 RED/BLU
Door lock actuator motor
control (Lock)
10 – 14 V
Manual door lock switch is at LOCK position
or driver side door key cylinder switch is at
LOCK position
0 V
Manual door lock switch is at any position
other than LOCK position or driver side door
key cylinder switch is at any position other
than LOCK position