Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 327 / 1257

Engine Mechanical: 1D-64
Specifications
Tightening Torque Specifications
S4RS0A1407001
NOTE:
The specified tightening torque is also described in the following.
“Throttle Body Components: ”
“Throttle Body and Intake Manifold Components: ”
“Engine Mountings Components: ”
“Timing Chain Cover Components: ”
“Timing Chain and Chain Tensioner Components: ”
“Camshaft, Tappet and Shim Components: ”
“Valves and Cylinder Head Components: ”
“Pistons, Piston Rings, Connecting Rods and Cylinders Components: ”
“Main Bearings, Crankshaft and Cylinder Block Components: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information: in Section 0A”.
Fastening part
Tightening torque
Note
N
˜
m kg-m lb-ft
Camshaft housing bolts
8 0.8 6.0
(for tightening of
special tool)
)
Camshaft housing bolt 11 1.1 8.0 ) / ) / )
Cylinder head cover bolt 8 0.8 6.0 )
Accelerator cable locking nut 12 1.2 9.0 )
EVAP canister purge valve bracket bolt 5 0.5 4.0 )
Engine left mounting bracket nut 55 5.5 40.0 )
Engine right mounting nut 65 6.5 47.0 )
Engine rear mounting bush bolt 55 5.5 40.0 )
Starting motor terminal nut 11 1.1 8.0 )
Generator terminal nut 6 0.6 4.5 )
Timing chain cover bolt 25 2.5 18.0 )
Timing chain cover nut 25 2.5 18.0 )
Cap bolt 25 2.5 18.0 )
Oil gallery pipe No.2 and No.3 bolt 11 1.1 8.0 )
Crankshaft pulley bolt 150 15.0 108.5 )
Oil control valve mounting nut 11 1.1 8.0 )
Oil gallery pipe No.1 bolt 30 3.0 21.5 )
Timing chain No.1 guide bolt 11 1.1 8.0 )
Timing chain tensioner bolt 25 2.5 18.0 )
Timing chain tensioner adjuster bolt 11 1.1 8.0 )
Intake cam timing sprocket bolt 60 6.0 43.5 )
Venturi plug 5 0.5 3.5 )
Cylinder head bolt for M8 25 2.5 18.0 )
Cylinder head bolt for M10 20 N
˜
m (2.0 kg-m, 14.5 lb-ft), 40 N
˜
m (4.0
kg-m, 29.0 lb-ft) and then retighten by
turning through to 60
q
twice
)
Connecting rod bearing cap nut 15 N
˜
m (1.5 kg-m, 11.0 lb-ft) and then
retighten by turning through 45
q
twice
) / )
Sensor plate bolt 11 1.1 8.0 )
Main bearing cap No.1 bolt ((1) – (10)) 30 N
˜
m (3.0 kg-m, 22.0 lb-ft), 50 N
˜
m (5.0
kg-m, 36.5 lb-ft) and then retighten by
turning through 60
q
) / ) / )
Main bearing cap No.2 bolt ((11) – (20)) 25 2.5 18.0 ) / ) / )
Rear oil seal housing bolt 11 1.1 8.0 )
Flywheel bolt 70 7.0 51.0 )