Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 1213 / 1257

Body Electrical Control System: 10B-13
DTC Table
S4RS0AA204004
DTC Check
S4RS0AA204005
Using SUZUKI Scan Tool
1) Prepare SUZUKI scan tool.
2) With ignition switch turned OFF, connect it to data link connector (DLC) located on underside of instrument panel
of driver’s side.
Special tool
(A): SUZUKI scan tool
3) Turn ignition switch ON.
DTC
(displayed on
SUZUKI scan
tool)
DTC (indicated
by alarm
indicator lamp)
DTC (displayed on
odometer in
combination meter)
Detected item Detecting condition
NO DTC 0000 0000 — No DTC detected
) B1133 1133 b1133 Battery voltage too high Battery voltage too high
) B1141 1141 b1141
Outside air temperature
(ambient temperature)
sensor circuit open
Sensor output voltage too
high
) B1142 1142 b1142
Outside air temperature
(ambient temperature)
sensor circuit short to
ground
Sensor output voltage too
low
) B1143 1143 b1143
Outside air temperature
(ambient temperature)
sensor malfunction
Sensor output voltage out of
specification
) B1150 1150 b1150
Air bag communication
circuit malfunction
Air bag communication
circuit open or short to
ground
) B1157 1157 b1157
Air bag deployment signal
input Air bag deployment signal
inputted
) B1170 1170 b1170 EEPROM access error Memory error
) U1001 1001 U1001
High speed CAN
communication bus Transmitting error of BCM for
specified time continuously
) U1073 1073 U1073
Control module
communication bus off
Transmitting and receiving
error of BCM for specified
time continuously
) U1100 1100 U1100
Lost communication with
ECM
Receiving error of BCM from
ECM for specified time
continuously
) U1101 1101 U1101
Lost communication with
TCM
Receiving error of BCM from
TCM for specified time
continuously
(A)
I4RS0AA20003-