Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 1155 / 1257

Security and Locks: 9F-5
Rear End Door Opener System Symptom Diagnosis
S4RS0A9604007
NOTE:
• Use SUZUKI scan tool makes it easy to check whether a faulty condition is on the input side or
output side of BCM. For checking procedure, refer to “Diagnosis Using Output Test Function of
SUZUKI Scan Tool” under “Scan Tool Data: in Section 10B”.
• Check each part in the order from the top of the following list.
Rear End Door Opener System Operation Inspection
S4RS0A9604008
1) Unlock all doors by using manual lock switch, keyless entry transmitter, or key cylinder switch.
2) Make sure that latch of rear end door is released from striker when rear end door opener switch is pushed.
If malfunction is found, go to “Rear End Door Opener System Symptom Diagnosis: ”.
Repair Instructions
Front Door Lock Assembly Components
S4RS0A9606001
Condition Possible cause Correction / Reference Item
Rear end door can not be
opened Circuit fuse blown Replace fuse and check for short circuit.
Rear end door opener switch faulty Check rear end door opener switch referring to
“Rear End Door Opener Switch Inspection: ”.
Rear end door actuator faulty Check rear end door actuator referring to
“Power Door Lock Actuator Inspection: ”.
Wiring or grounding faulty Repair circuit.
BCM faulty Replace after making sure that none of above
parts is faulty.
(a)
(b)
2
6
3
7
1
4
5
I4RS0A960002-
1. Front door latch assembly
: Apply lithium grease 99000-25010 to sliding and rotating parts and spring if any.
4. Latch striker 7. Inside handle bezel
2. Outside handle
: Apply lithium grease 99000-25010 to sliding part.
5. Shim : 5.0 N
˜
m
(0.5 kg-m, 4.0 lb-ft)
3. Outside handle frame
: Apply lithium grease 99000-25010 to sliding part and spring.
6. Key cylinder : 10 N
˜
m
(1.0 kg-m, 7.5 lb-ft)