Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 335 / 1257

Engine Lubrication System: 1E-6
4) Install oil pan to cylinder block temporarily.
5) Insert knock pin (1) in hole (2) of oil pan in order to
locate oil pan precisely.
NOTE:
Knock pin is available as a spare part (part
number: 04211–13189).
6) After fitting oil pan to cylinder block, run in securing
bolts and start tightening at the center: move wrench
outward, tightening one bolt at a time. Tighten bolts
and nuts to specified torque.
Tightening torque
Oil pan bolt (M6) (a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
Oil pan bolt (M10) (c): 55 N·m (5.5 kg-m, 40.0 lb-
ft)
Oil pan nut (e): 11 N·m (1.1 kg-m, 8.0 lb-ft)
7) Install new gasket and drain plug to oil pan.
Tighten drain plug to specified torque.
Tightening torque
Oil pan drain plug (b): 35 N·m (3.5 kg-m, 25.5 lb-
ft)
8) Tighten transaxle stiffener bolts to specified torque.
Tightening torque
Transaxle stiffener bolt (d): 55 N·m (5.5 kg-m,
40.0 lb-ft)
9) Install exhaust manifold stiffener (2) and exhaust
No.1 pipe (1) and heated oxygen sensor No.1
(connector color: green) (3) referring to “Exhaust
System Components: in Section 1K”.
10) Install clutch housing lower plate (1).
11) Install oil level gauge.
12) Refill engine with engine oil referring to “Engine Oil
and Filter Change: in Section 0B”.
13) Verify that there is no engine oil leakage and exhaust
gas leakage at each connection.
Oil Pan and Oil Pump Strainer Cleaning
S4RS0A1506003
• Clean sealing surface between oil pan and cylinder
block.
Remove oil, old sealant, and dust from sealing
surface.
• Clean oil pump strainer screen (1).
2
1
I4RS0A150007-
(a)
(b)
(c) (e)
(d)
I4RS0A150008-
2
1
3
I4RS0A150003-
1
I4RS0A150004-
I2RH0B150016-