Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 727 / 1257

Manual Transmission: 5B-18
15) Remove side bearing retainer bolts.
16) Turn side bearing retainer (1) counterclockwise until
it stops, and remove side bearing retainer using 2 flat
end rods (2) or the like.
17) Remove O-ring from side bearing retainer.
18) Remove differential bearing shim.
19) Remove differential side bearing outer race from left
case (1) using special tools.
Special tool
(A): 09924–74510
(B): 09926–27610
20) Remove differential gear assembly (1) from right
case (2).
Installation
1) Install differential assembly (1) into right case (2).
2) Join input shaft assembly (5), countershaft assembly
(4), low speed gear shift shaft (2) and high speed
gear shift shaft (3) assemblies all together, then
install them into right case (1).
CAUTION:
Take care not to damage oil seal lip by input
shaft, or oil leakage may take place.
NOTE:
• Input shaft right bearing on shaft can be
installed into right case tapping shaft with
plastic hammer.
• Check to make sure that countershaft is
engaged with final gear while installing.
(A)
1
I4RH01520021-
1
2
2
I4RS0A520034-
(A)
(B)
1
I4RS0A520035-
3. VSS
3. VSS
I2RH01520036-
I2RH01520036-
I2RH01520080-