Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 731 / 1257

Manual Transmission: 5B-22
15) By repeating Step 14), select a suitable shim which
adjusts clearance “a” to specification and put it on
bearing outer race.
NOTE:
Insert 0.15 mm (0.0059 in.) feeler to know
whether or not a shim fulfills specification
quickly.
Available shim thickness
16) Place left case plate (2) inserting its end in groove of
shift guide shaft (4) and tighten bolts (1) to which
thread lock cement has been applied.
NOTE:
After tightening bolts, make sure that
countershaft (5) can be rotated by hand
feeling certain load.
“A”: Thread lock cement 99000–32110
Tightening torque
Left case plate bolt (a): 23 N·m (2.3 kg-m, 17.0
lb-ft)
17) Install fifth gear referring to “Fifth Gear Disassembly
and Assembly: ”.
18) Install gear shift and select shaft assembly referring
to “Gear Shift and Select Shaft Assembly Removal
and Installation: ”.
19) Install back up lamp switch referring to “Back Up
Lamp Switch Removal and Installation: ”.
20) Check input shaft for rotation in each gear position.
21) Also confirm continuity of back up lamp switch in
reverse position using ohmmeter.
Transaxle Right Case Disassembly and
Assembly
S4RS0A5206020
Disassembly
1) Remove gear shift shaft, input shaft assembly and
countershaft assembly referring to “Manual
Transaxle Assembly Disassembly and Reassembly:
”.
2) Remove differential side bearing outer race from
right case (1) using special tool.
Special tool
(A): 09925–15410
0.55 mm (0.021 in.) 0.90 mm (0.035 in.)
0.60 mm (0.023 in.) 0.95 mm (0.037 in.)
0.65 mm (0.025 in.) 1.00 mm (0.039 in.)
0.70 mm (0.027 in.) 1.05 mm (0.041 in.)
0.75 mm (0.029 in.) 1.10 mm (0.043 in.)
0.80 mm (0.031 in.) 1.15 mm (0.059 in.)
0.85 mm (0.033 in.)
I3RM0A520031-
3. Input shaft
I4RS0A520042-
(A)
1
I3RM0B521021-