Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 283 / 1257

Engine Mechanical: 1D-20
15) Adjust A/C compressor belt tension (if equipped)
referring to “Compressor Drive Belt Inspection and
Adjustment: in Section 7B”.
16) Adjust accelerator cable play referring to
“Accelerator Cable Adjustment: ” in this section.
17) Check to ensure that all removed parts are back in
place.
Reinstall any necessary parts which have not been
reinstalled.
18) Refill cooling system with coolant referring to
“Cooling System Flush and Refill: in Section 1F”.
19) Refill engine with engine oil referring to “Engine Oil
and Filter Change: in Section 0B”.
20) Refill transaxle with transaxle oil referring to “Manual
Transaxle Oil Change: in Section 5B” or “A/T Fluid
Change: in Section 5A”.
21) Install battery and tray.
22) Connect positive and negative cable at battery.
23) Verify that there is no fuel leakage, coolant leakage,
oil leakage and exhaust gas leakage at each
connection.
Timing Chain Cover Components
S4RS0A1406014
I4RS0A140011-
1. Crankshaft pulley bolt 9. Oil gallery pipe No.1 17. Oil control valve
2. Crankshaft pulley 10. Copper washer 18. Oil control valve mounting nut
3. Oil seal
: Apply engine oil to oil seal lip.
11. Oil gallery pipe No.1 bolt 19. Cap
4. Timing chain cover
: Apply sealant 99000-31140 to the mating
surface of cylinder and cylinder head.
: Apply sealant 99000-31260 to the mating
surface of timing chain cover referring to the
figure of Step 5) of “Installation” under “Timing
Chain Cover Removal and Installation: ”.
12. Oil gallery pipe No.2 : 11 N
˜
m (1.1 kg-m, 8.0 lb-ft)
5. Pin 13. Oil gallery pipe No.2 bolt : 25 N
˜
m (2.5 kg-m, 18.0 lb-ft)
6. Cap bolt 14. Oil gallery pipe No.3 : 30 N
˜
m (3.0 kg-m, 22.0 lb-ft)
7. Timing chain cover mounting bolts 15. Oil gallery pipe No.3 bolt : 150 N
˜
m (15.0 kg-m, 108.5 lb-ft)
8. Timing chain cover mounting nut 16. O-ring
: Apply engine oil.
: Do not reuse.