Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 59 / 1257

Engine General Information and Diagnosis: 1A-11
Connector: E23
16 BLU/RED Fuel injector No.3 output 46 BLK/RED
Heater output of heated
oxygen sensor-1
17 BLU/ORN Fuel injector No.4 output 47 RED/BLU
Heater output of heated
oxygen sensor-2
18 BRN/YEL
EGR valve (stepper motor coil
4) output
48 YEL/GRN Starting motor signal
19 WHT/RED
EGR valve (stepper motor coil
3) output
49 RED/WHT IAC valve output
20 RED/YEL CMP sensor signal 50 — Ground of ECM for shield wire
21 PNK CKP sensor signal 51 — Ground of ECM for shield wire
22 — — 52 — Ground of ECM for shield wire
23 — — 53 RED/BLK
Manifold absolute pressure
(MAP) sensor signal
24 LT GRN
Engine coolant temp. (ECT)
sensor signal
54 GRY/BLU
Throttle position (TP) sensor
signal
25 BLK/YEL
Intake air temp. (IAT) sensor
signal
55 ORN Ground for sensors
26 GRN/BLK
Mass air flow (MAF) sensor
signal
56 RED Knock sensor signal
27 GRY Ground for MAF sensor 57 YEL Ground for sensors
28 — — 58 BLK/ORN Ground for ECM
29 BLU/BLK
EVAP canister purge valve
output
59 YEL/GRN Oil control valve ground
30 BLK Ground for ECM 60 YEL/RED Oil control valve output
Terminal Wire color Circuit Terminal Wire color Circuit
Terminal Wire color Circuit Terminal Wire color Circuit
1 BLK/RED Main power supply 31 — —
2 WHT/RED
Power source for ECM internal
memory
32 — —
3 RED
CAN communication line
(active high signal) for BCM,
combination meter
33 — —
4 BRN
Engine revolution signal output
for EPS control module
34 — —
5 PPL/WHT
Serial communication line of
data link connector 12 V
35 — —
6 — — 36 — —
7 — — 37 — —
8 — — 38 — —
9 — — 39 — —
10 — — 40 — —
11 — — 41 — —
12 — — 42 — —
13 YEL/RED
Clock signal for immobilizer
coil antenna
43 — —
14 — — 44 — —
15 GRN/WHT Fuel pump relay output 45 — —
16 BLK/RED Main power supply 46 LT GRN
Radiator cooling fan relay No.1
output
17 — — 47 GRY A/C compressor relay output
18 WHT
CAN communication line
(active low signal) for BCM,
combination meter
48 GRN
Radiator cooling fan relay No.2
and No.3 output
19 BLU/WHT
Electric load signal for heater
blower motor
49 — —
20 GRN/WHT Stop lamp switch signal 50 — —
21 — — 51 — —
22 — — 52 — —