Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 698 / 1257

5A-158 Automatic Transmission:
Available O/D and 2nd coast brake rear plate
thickness
43) After applying A/T fluid to new 2nd brake gaskets (1),
install them to transaxle case (2).
44) After applying A/T fluid to reverse clutch drum thrust
bearing (1), install it to forward and reverse clutch
assembly (2).
45) Remove sealant attached to mating surface of
transaxle rear cover (1) completely.
46) Apply sealant to mating surface of transaxle rear
cover (1) by using a nozzle (2) as shown in figure by
such amount that its section is 1.2 mm (0.047 in.) in
diameter.
“A”: Sealant 99000–31230
47) Install transaxle rear cover assembly on transaxle
case.
48) Install hook (2) to location shown in figure.
49) Tighten rear cover bolts (1).
Tightening torque
Rear cover bolt (a): 25 N·m (2.5 kg-m, 18.0 lb-ft)
50) Install fluid reservoir LH plate (1).
Tightening torque
Fluid reservoir LH plate bolt (a): 10 N·m (1.0 kg-
m, 7.5 lb-ft)
51) After applying A/T fluid to new governor apply No.2
gasket (1), install it to transaxle case.
Thickness Identification mark
1.8 mm (0.071 in.) 1
2.0 mm (0.079 in.) 2
2.2 mm (0.087 in.) 3
2.4 mm (0.094 in.) 4
2.6 mm (0.102 in.) 5
I2RH0B510298-
I2RH0B510299-
I2RH0B510300-
“A”
2
1
I2RH0B510301-
I3RM0B510068-
I2RH0B510303-