Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 785 / 1257

Power Assisted Steering System: 6C-12
4 1) Check for proper connection to P/S control module at
“E49-1” terminal.
2) If OK, check for voltage between “E49-1” (“GRN” wire)
terminal and body ground with ignition switch ON.
Is it 10 – 14 V?
Go to Step 5. “BLK” or “GRN” wire
circuit open or short to
ground.
5 1) Check for proper connection to the P/S control module at
“E52-1” terminal.
2) If OK, check voltage between “E52-1” (“LT GRN/BLK”
wire) terminal and body ground with ignition switch ON.
Is it 10 – 14 V?
Go to Step 6. “LT GRN/BLK” wire
circuit open or short to
ground.
6 1) Remove combination meter and disconnect combination
meter connector (“G28”) with ignition switch turned OFF.
2) Check for proper connection to the combination meter at
“G28-31” terminal.
3) If OK, check voltage between “G28-31” (“RED/BLK”
wire) terminal and body ground with ignition switch ON.
Is it 10 – 14 V?
Go to Step 7. “RED/BLK” wire circuit
open or short to ground.
7 1) Check for proper connection to the combination meter at
“G28-25” terminal and P/S control module at “E52-5”
terminal.
2) Measure resistance between the combination meter at
“G28-25” terminal and the P/S control module at “E52-5”
terminal.
Is it infinite (
f
)?
“GRY” wire circuit open. Connect combination
meter connector (“G28”)
with ignition switch
turned OFF.
Go to Step 8.
8 1) Check for voltage between “E52-5” (“GRY” wire)
terminal and body ground with ignition switch ON.
Is it 10 – 14 V?
Replace the P/S control
module. Replace the
combination meter.
Step Action Yes No