Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 635 / 1257

Automatic Transmission: 5A-95
Select Cable Removal and Installation
S4RS0A5106003
Removal
1) Remove parking brake lever cover.
2) Remove console box.
3) Disconnect select cable from selector lever and then
detach from bracket.
4) Remove clip and disconnect select cable from
manual select lever.
5) Remove select cable retainer from dash panel.
Installation
Install select cable by reversing removal procedure.
The important steps in installation are as follows.
• Apply grease to pin and cable joint.
• Tighten bolts to specified torque referring to “Select
Cable Components: ”.
• Adjusting procedure is as follows. Refer to “Select
Cable Adjustment: ”.
Select Cable Adjustment
S4RS0A5106007
1) Shift manual shift lever to “N” range (transmission
range sensor “N” range).
2) Remove adjuster (cable end) from selector lever pin
of selector lever assembly.
3) Release lock plate (1) which restrict moving of cable
end holder (2).
4) Push cable end holder (1) out from eye-end (2) using
an appropriate tool (3) to disengage cable.
5) Shift selector lever to “N” position.
6) Apply grease to selector lever pin and install adjuster
(cable end) to it.
: Grease 99000–25010
7) With both selector lever and transmission range
sensor kept each “N” position, drive cable end holder
(1) in until it locks cable.
8) Slide lock plate (2) to secure cable end holder in
position.
9) After select cable was installed, check for the
following.
• Push vehicle with selector lever shifted to “P”
range. Vehicle should not move.
• Vehicle can not be driven in “N” range.
• Vehicle can be driven in “D”, “3”, “2” and “L”
ranges.
• Vehicle can be backed in “R” range.
1. Selector lever assembly 6. Clip 11. Lock
2. Select cable 7. Select cable retainer bolt (a): 23 N
˜
m (2.0 kg-m, 17.0 lb-ft)
3. Select cable retainer 8. Manual select lever pin
: Apply lithium grease 99000-25010 to all around pin (0.15 g)
(b): 5.0 N
˜
m (0.55 kg-m, 4.0 lb-ft)
4. Cable bracket 9. Selector lever pin
: Apply lithium grease 99000-25010 to all around pin (0.15 g)
: Tightening torque
5. Manual select lever 10. Adjuster case
“P”
“R” “N” “D”
“2”
“L”
I3RM0B510036-
I2RH01510046-
I2RH01510047-
I3RM0B510037-