Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 700 / 1257

5A-160 Automatic Transmission:
57) Check for correct installation of direct clutch
assembly as follows.
Measure distance “a” by using micrometer caliper (1)
and straightedge (2). If out of specification, remove
direct clutch assembly, direct clutch hub and reinstall
them properly.
Distance between direct clutch assembly and
mating surface of transaxle case
“a”: 10.5 – 11.3 mm (0.413 – 0.445 in.)
58) Install oil pump assembly (1) to transaxle case.
Tightening torque
Oil pump assembly bolt (a): 25 N·m (2.5 kg-m,
18.0 lb-ft)
59) Make sure that input shaft (1) turns smoothly.
60) Measure input shaft thrust play.
Apply dial gauge onto input shaft end (1) and
measure thrust play of input shaft.
Special tool
(A): 09900–20607
(B): 09900–20701
Input shaft thrust play
0.3 – 0.9 mm (0.012 – 0.035 in.)
When input shaft thrust play is out of specification,
select input shaft front thrust bearing with proper
thickness from among the following table and
replace it.
Available input shaft front thrust bearing thickness
61) After applying A/T fluid to new O-ring, fit it to
breather union (2). Then install breather union to
transaxle case.
62) Install breather hose (1).
“a”
“a”
1
2
I2RH0B510310-
I2RH0B510311-
Thickness
Outside
diameter
Inside diameter
3.45 mm
(0.14 in.) 48.5 mm
(1.90 in.)
32.9 mm
(1.30 in.)
4.05 mm
(0.16 in.) 48.5 mm
(1.90 in.)
32.5 mm
(1.28 in.)
I2RH0B510312-
I2RH0B510313-
I2RH0B510314-