Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 627 / 1257

Automatic Transmission: 5A-87
Connector “C35”
5 WHT/BLU
TCC pressure control
solenoid valve (+)
*0 – 0.6 V
np
10 – 14 V
(“Reference
waveform
No. 2: ”)
Engine running at idling (Output signal is duty pulse.
Duty ratio varies depending on torque converter clutch
operating condition).
6 YEL/BLK Power source 10 – 14 V Ignition switch ON
7 WHT
CAN communication
line (Low)
*2.5 – 3.6 V
np
1.6 – 2.5 V
(“Reference
waveform
No. 3: ”)
Engine running at idling with after warming up.
(CAN communication signal is pulse. Pulse signal
frequency varies depending on engine condition.))
8 — — — —
9 — — — —
10 — — — —
11 LT GRN
Transmission fluid
temperature sensor (+) 2.9 – 3.1 V Ignition switch ON, fluid temperature is 20
q
C (68
q
F)
0.3 – 0.5 V Ignition switch ON, fluid temperature is 100
q
C (212
q
F)
12 ORN
Transmission fluid
temperature sensor (–)
0 – 1 V Ignition switch ON
13 — — — —
14 BLU/BLK Timing solenoid valve 0 – 1 V Ignition switch ON
15 BLK/YEL
Shift solenoid valve-B
(No.2)
9 – 14 V Ignition switch ON, select lever in “P” range
16 BRN
Shift solenoid valve-A
(No.1)
9 – 14 V Ignition switch ON, select lever in “P” range
17 RED
CAN communication
line (High)
*2.5 – 3.6 V
np
1.6 – 2.5 V
(“Reference
waveform
No. 3: ”)
Engine running at idling with after warming up.
(CAN communication signal is pulse. Pulse signal
frequency varies depending on engine condition.)
18 — — — —
19 — — — —
20 — — — —
21 — — — —
22 — — — —
23 BLK Ground 0 – 1 V Ignition switch ON
24 WHT/RED
Power source for back-
up
10 – 14 V Constantly
Terminal Wire color Circuit
Standard
voltage
Condition
1 RED
Transmission range
sensor (“R” range)
8 – 14 V Ignition switch ON, selector lever at “R” range
0 – 1 V
Ignition switch ON, selector lever at other than “R”
range
2 — — — —
3 — — — —
4 — — — —
5 — — — —
6 WHT
Input shaft speed
sensor (+)
2 – 3 V Ignition switch turned ON, engine stops.
*(“Referenc
e waveform
No. 4: ”)
While engine running.
(Output signal is waveform. Waveform frequency varies
depending on output shaft speed. (16 pulses are
generated par 1 input shaft revolution.))
Terminal Wire color Circuit
Standard
voltage
Condition