Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 703 / 1257

Automatic Transmission: 5A-163
74) Connect solenoid connectors to solenoid valves
identifying their installing positions by wire colors,
and install transmission fluid temperature sensor to
its clamp.
Solenoid valve coupler specification
75) Install oil strainer assembly (1).
Tightening torque
Oil strainer bolt (a): 10 N·m (1.0 kg-m, 7.5 lb-ft)
76) Install oil cleaner magnets (1) in oil pan (2).
NOTE:
If metal particles are attached to the magnets,
clean them before installing.
77) Install new oil pan gasket (1) between transaxle case
and oil pan (2).
78) Tighten oil pan bolts to specified torque diagonally
and little by little.
Tightening torque
Oil pan bolt (a): 7.0 N·m (0.7 kg-m, 5.0 lb-ft)
79) After applying A/T fluid to new O-rings, fit it to fluid
inlet union (1). Then install fluid outlet union to
transaxle case.
Tightening torque
Fluid outlet union (a): 25 N·m (2.5 kg-m, 18.0 lb-
ft)
B (2) 28 mm (1.10 in.) 5
C (3) 49 mm (1.93 in.) 1
D (4) 36 mm (1.42 in.) 1
E (5) 40 mm (1.58 in.) 1
Solenoid valve coupler Wire color
Shift solenoid valve-A (1) White
Shift solenoid valve-B (2) Black
Timing solenoid valve (3) Yellow
TCC pressure control solenoid
valve (4) Light green /
Brown
Pressure control solenoid valve (5) Gray / Green
Transmission fluid temperature
sensor (6)
Orange
Bolt Length “a” Pieces
I2RH0B510323-
1
2
3
5
4
6
I4RS0A510030-
I2RH0B510325-
I2RH0B510326-
I2RH0B510327-