Suzuki SWIFT RS415 2017, Руководство по обслуживанию

Страница: 293 / 1257

Engine Mechanical: 1D-30
3) Install intake camshaft (1) and exhaust camshaft (2).
Align knock pin (3) and match mark (4) with notches
(5) as shown in the figure.
NOTE:
Before installing camshafts, turn crankshaft
until key position faces upward.
Refer to “Timing Chain and Chain Tensioner
Removal and Installation: ”.
4) Apply engine oil to sliding surface of each camshaft
and camshaft journal then install them as shown in
the figure.
5) Install camshaft housing pins (1) as shown in the
figure.
6) Check position of camshaft housings.
Embossed marks are provided on each camshaft
housing, indicating position and direction for
installation. Install housings as indicated by these
marks.
7) After applying engine oil to housing bolts, tighten
them temporarily first. Then tighten them by the
numerical order in the figure. Tighten a little at a time
and evenly among bolts and repeat tightening
sequence two or three times before they are
tightened to specified torque.
Tightening torque
Camshaft housing bolt (a): 11 N·m (1.1 kg-m, 8.0
lb-ft)
8) With hexagonal section (1) of intake camshaft (2)
held stationary with spanner or the like, tighten bolt
of intake cam timing sprocket assembly (3) to
specification.
Tightening torque
Intake cam timing sprocket bolt (a): 60 N·m (6.0
kg-m, 43.5 lb-ft)
9) Install timing chain with crankshaft sprocket referring
to “Timing Chain and Chain Tensioner Removal and
Installation: ”.
10) Install timing chain cover referring to “Timing Chain
Cover Removal and Installation: ”.
11) Check valve lashes referring to “Valve Lash
(Clearance) Inspection: ”.
“a”: Approx. 30
q
1
I3RH0B140039-
1
2
3
4
5
“a”
I4RS0A140014-
I3RM0A140033-
A: I: Intake side or E: Exhaust side
B: Position from timing chain side
C: Pointing to timing chain side
I2RH0B140078-
“10” “9” “2” “1”,(a) “6” “5” “14” “13”
“20”
“17”
“19”
“18”
“21”
“12” “11” “4” “3” “8” “7” “16” “15”
I3RH0B140041-
1
2
3
(a)
I3RH0B140042-