Televes OLT 769401 User Manual Download Page 233

Page: 233 / 482

233

Figure 7-111: Output of ”show” command in this node context

Parameter

Description

OLT service ID

Service Name

OLT service Name.

DHCP Opt

DHCP Options:18/37/82 – Enabled DHCP options in the service

Priority

pbit value in the DHCP packets (0<=n<=7)

Broadcast Flag

Circuit Id

Use Global

: if Enabled the Circuit-Id configure in the Global DHCP configuration window is

being used.

Service Template String

: Circuit-Id template used for the service if Use Global Disabled.

Table 7-89: “show” command output table parameters

7.6.5.2.3 “showconfig” command

Name

showconfig

Description

Show DHCP services information.

Full path

/dhcp/dhcp-services/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-90: “showconfig” command information

/cli/dhcp/dhcp-services> showconfig ?

Usage SHOWCONFIG:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-112: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands