Televes OLT 769401 User Manual Download Page 414

Page: 414 / 482

Descripción del producto

414

/cli/routing/ipv4-interface> create ?

Usage CREATE:

CREATE Create a new entity.

--serviceID Select an OLT service by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this

context. (enable|disable)

--ip-address IPv4 address

--mtu Interface MTU [68 - 9198].

--name IP interface name. (STRING 31)

--subnet-mask IPv4 Subnet Mask

Figure 7-497: CLI on line help on “create” command usage in this node context

7.6.18.2.3 “remove” command

Name

remove

Description

Remove an existing entity by ID

Full path

/routing/ipv4-interface/remove

Mandatory Parameters

-ID

Screen Output

Table 7-462: “remove” command information

/cli/routing/ipv4-interface> remove ?

Usage REMOVE:

REMOVE Remove an existing entity by ID.

--ID Identifies a table entry by ID, in this context.

Figure 7-498: CLI on line help on “remove” command usage in this node context

7.6.18.2.4 “show” command

Name

show

Description

Show the current configuration.

Full path

/routing/ipv4-interface/show

Mandatory Parameters

No mandatory parameters

Screen Output

Table, Figure 7-500. Table parameters description in Table 7-464.

Table 7-499: CLI on line help on “show” command usage in this node context

/cli/routing/ipv4-interface> show ?

Usage SHOW:

SHOW Show the current configuration

Figure 7-499: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands