FRPRO EVO HD
Quick start guide
Product overview
The Fracarro FRPRO EVO HD is an high selective programmable compact headend for filter, amplify and
convert the VHF/UHF Digital Terrestrial channels as well as mix the FM signal. The FRPRO EVO HD is a
complete“Fully Agile Digital Channel Processor” that can be used on small, medium or high installation plants as
well as in hospitality enviroments.
•
Can process and convert more than 50 indipendent RF channels with very high selectivity on adjacent
channel
•
AGC automatic control circuit on all individual VHF/UHF input multiplexes
•
Isofrequency or “Fully Agile” frequency conversion for every filters and from any input even from VHF to
UHF frequencies.
•
Security code available for avoid incidental settings
•
5 indipendents inputs: FM / 4 x VHF-UHF with selectable 12-24 V remote power on all VHF-UHF input
Quick Mounting Instructions
•
Connect the device to the grounding electrode of the antenna system and fix the FRPRO EVO HD in
vertical position for guarantee the correct ventilation and heat dissipation;
•
Connect the power cord to the power supply socket. Check the status LED for DC power presence;
•
Connect the VHF/UHF and/or FM aerial’s coaxial cables to the FRPRO EVO HD;
•
Connect the RF output coaxial cable to the RF coaxial distribution network;
•
If necessary, connect a field meter to the -30dB test port to check the quality signal
•
Configure the device using the three settings buttons available on the top of the FRPRO EVO HD (NOTE:
press the “confirm button” for two seconds to to access the main menù and use the left-down or right-up
arrows to scroll the sub-menù. Refer to the Quick Settings Guide chapter).
•
Optionally: insert an SD card in the SD slot to upload/download the configurations from/to another FRPRO
EVO HD;
NOTE. If necessary, the power adapter can easily be replaced without unmount the product by open the top left
plastic cover. Please refer to the Safety and Installation Warning chapter before proceed.