Televes OLT 769401 User Manual Download Page 366

Page: 366 / 482

Descripción del producto

366

7.6.17.6.1 “show” command

This command will give the user an overview of how many ONUs exists and where (slot, port), This command should be executed when trying to

find the right values for the arguments <slot,port,onuID>.

For each slot, displays all the PONs and respective ONUs IDs.

The table can grow to be very large, hence it accepts two optional parameters to filter the information displayed.

Name

show

Description

Display a table with all ONU IDs and their respective interfaces. Can filter the results

with the optional arguments.

Full path

/remote-eq/onu/ show

Mandatory Parameters

Screen Output

Table, Figure 7-405. Table parameters description in Table 7-367.

Table 7-366: “show” command information

/cli/remote-eq/onu> show ?

Usage:

SHOW Display a table with all ONU IDs and their respective interfaces. Can filter

the results with the optional arguments.

[OPTIONAL]

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-404: CLI on line help on “show” command usage in this node context

Figure 7-405: Output of ”show” command in this node context

Parameter

Description

Slot

Indicates a slot

Port

Indicates an OLT interface

ONU ID List

Lists the ONUs connected to a PON port ONU ID (number)

Table 7-367: “show” command output table parameters

7.6.17.6.2 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/remote-eq/onu/showconfig

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands