Televes OLT 769401 User Manual Download Page 191

Page: 191 / 482

191

cli/acl> config ?

Usage:

CONFIG Configure parameters for an existing ACL.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context. (enable|disable)

--name Identifies the name of an ACL. (STRING 31)

--type Identifies the type of an ACL. (mac|ipv4-std|ipv4-ext|ipv6-ext)

Figure 7-23: CLI on line help on “config” command usage in this node context

7.6.1.2 “create” command

Name

create

Description

Create a new ACL.

Full path

/acl/create

Mandatory Parameters

--type

Screen Output

Table 7-6: “create” command information

/cli/acl> create ?

Usage:

CREATE Create a new ACL.

--type Identifies the type of an ACL. (mac|ipv4-std|ipv4-ext|ipv6-ext)

[OPTIONAL]

--ID Identifies a table entry by ID, in this context.

--admin Administrative State. Enable/disable, in this context. (enable|disable)

--name Identifies the name of an ACL. (STRING 31)

Figure 7-24: CLI on line help on “create” command usage in this node context

7.6.1.3 “remove” command

Name

remove

Description

Remove an existing ACL.

Full path

/acl/remove

Mandatory Parameters

--ID

Screen Output

Table 7-7: “remove” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands