Televes OLT 769401 User Manual Download Page 369

Page: 369 / 482

369

/cli/remote-eq/onu/analog-rf> showconfig ?

Usage SHOWCONFIG:

SHOWCONFIG Print the command list that enforces the current configuration

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-411: CLI on line help on “showconfig” command usage in this node contex

7.6.17.6.4 “e1” sub-node

7.6.17.6.4.1 “config-e1” command

Name

config-e1

Description

Configures E1 interfaces for a given ONU

Full path

/remote-eq/onu/e1/config-e1

Mandatory Parameters

-ID

Screen Output

Table 7-373: “config-e1” command information

/cli/remote-eq/onu/e1> config-e1 ?

Usage CONFIG-E1:

CONFIG-E1 Configure E1 interfaces for a given ONU.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--jitter E1 timing configuration (dcr|re-timing|acr)

--loop E1 loop configuration (no-loop|local|remote)

--monitor E1 Frame (none|g.704|g.704-g.706)

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-412: CLI on line help on “config-e1” command usage in this node context

7.6.17.6.4.2 “config-lsp” command

Name

config-lsp

Description

Configure LSP Ig/Eg paramters for a given ONU E1 interface.

Full path

/remote-eq/onu/e1/config-lsp

Mandatory Parameters

--ID
--lsp-egress
--lsp-ingress

Screen Output

Table 7-374: “config-lsp” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands