Televes OLT 769401 User Manual Download Page 255

Page: 255 / 482

255

/cli/eth-protection> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-160: CLI on line help on “showconfig” command usage in this node context

7.6.8.7 “status” command

Name

status

Description

Show status information for one Protection Group.

Full path

/eth-protection/status

Mandatory Parameters

This command has no parameters

Screen Output

Table Figure 7-596.Table parameters description in Table 7-136.

Table 7-135: “show” command information

/cli/eth-protection> status ?

Usage:

STATUS Show status information for one Protection Group.

Figure 7-161: CLI on line help on “status” command usage in this node context

Figure 7-162: Output of ”show” command in this node context

Parameter Group

Parameter

Description

Ethernet protection group Id

Interface Working

Slot

Identifies the Working slot

Port

Identifies the Working Interface

Status

Working interface Status information

Interface Protection

Slot

Identifies the Protecting slot

Port

Identifies the Protecting Interface

Status

Protection interface Status information

Active

Indicates which interface is active

WTR (s)

Wait to restore

Last Switch-over Cause

Indicates the cause for last switch-over

Last Cmd

Indicates last executed Command

Table 7-136: “status” command output table parameters

7.6.9 “gpon-protection” node

/cli/gpon-protection> tree

+ gpon-protection[@command, @config, @create, @remove, @show, @showconfig, @status]

Figure 7-163:“gpon-protection” node tree

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands