Televes OLT 769401 User Manual Download Page 438

Page: 438 / 482

Descripción del producto

438

Server Pack without Options

Trusted

Number of dropped packets because they are server replies without options

received in Trusted interfaces (Network Side)

Table 7-512: “show” command output table

7.6.19.8.3 “igmp” sub-node

7.6.19.8.3.1 “availableValues” command

Name

availableValues

Description

Display possible values for service IDs and Interfaces.

Full path

/services/statistics/igmp/availableValues

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-551. Table parameters description in Table 7-514.

Table 7-513: “availableValues” command information

/cli/services/statistics/igmp> availableValues ?

Usage:

AVAILABLEVALUES Display possible values for service IDs and Interfaces.

Figure 7-550: CLI on line help on “availableValues” command usage in this node context

Figure 7-551: Output of ”availableValues” command in this node context

Parameter

Description

Service (ID) Name

Available Service identified by Service ID (number) and Service Name

Slot

Slot number where is the port with the service available

Port

Port number where the service is available.

Table 7-514: “availableValues” command output table parameters

7.6.19.8.3.2 “show” command

Name

show

Description

Show the IGMP statistics for a given multicast service and respective interface.

Full path

/services/statistics/igmp/show

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands