Televes OLT 769401 User Manual Download Page 267

Page: 267 / 482

267

/cli/interfaces/ethernet/multicast> showconfig ?

Usage SHOWCONFIG:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-186: CLI on line help on “showconfig” command usage in this node context

7.6.10.1.7 services” sub-node

7.6.10.1.7.1 “add” command

Name

add

Description

Add a client service to map one Ethernet interface to an existing network

service.

Full path

/interfaces/ethernet/services/add

Mandatory Parameters

--name
--port
--serviceID--upstream-eth-profile-id

Screen Output

Table 7-161: “add” command information

/cli/interfaces/ethernet/services> add ?

Usage ADD:

ADD Add a client service to map one Ethernet interface to an

existing network service.

--name Set a name for this Client Service (STRING 65)

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3;

lag.1)

--serviceID Select an OLT service by ID.

--upstream-eth-profile-id Choose an existing upstream Ethernet profile by ID

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--dhcp-op18 DHCP Op.18 flag

--dhcp-op37 DHCP Op.37 flag

--dhcp-op82 DHCP Op.82 flag

--igmp IGMP (enable|disable)

--mac-limit Specifies the maximum number of MAC addresses allowed for a

given client service (unlimited or 1..99)

--max-bandwidth Set the multicast group maximum bandwidth in Kbps

(unlimited or 0..100000000)

--max-groups Set the maximum number of multicast groups (unlimited or

0..16384)

--nni-ctag Inner VLAN ID (client) on the network-facing (Ethernet)

interface. (1..4094)

--remoteID Remote ID field added to DHCP packets in DHCPop.82 enabled

services. (STRING 63)

--serviceID-client Choose a client service by ID.

--uni-ctag VLAN ID delivered/received from the (Ethernet) subscriber-

facing interface at the ONU. (1..4094)

--use-global-dhcp-ops Use DHCP options defined in the OLT global service.

Figure 7-187: CLI on line help on “add” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands