Televes OLT 769401 User Manual Download Page 433

Page: 433 / 482

433

Figure 7-539: Output of ”availableValues” command in this node context

Parameter

Description

Service (ID) Name

Available Service identified by Service ID (number) and Service Name

Slot

Slot number where is the port with the service available

Port

Port number where the service is available.

Table 7-502: “availableValues” command output table parameters

7.6.19.8.1.2 “show” command

Name

show

Description

Show the statistics for a given service and interface, whose counter has already

been activated.

Full path

/services/statistics/counters/show

Mandatory Parameters

--serviceID

Screen Output

Table, Figure 7-541. Table parameters description in Table 7-504.

Table 7-503: “show” command information

/cli/services/statistics/counters> show ?

Usage:

SHOW Show the statistics for a given service and interface, whose counter has

already been activated.

--serviceID Select an OLT service by ID.

[OPTIONAL]

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3;

lag.1)

Figure 7-540: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands