Televes OLT 769401, User Manual

Page: 424 / 482

Descripción del producto
424
7.6.18.5.5 “status” command
Name status
Description Show the current route table status.
Full path
/routing/traceroute/status
Mandatory Parameters
No
Screen Output
Table, Figure 7-523. Table parameters description in Table 7-487.
Table 7-486: “status” command information
/cli> routing/traceroute/status ?
Usage STATUS:
STATUS Show the current traceroute sessions status
[OPTIONAL]
--ID Identifies a table entry by ID, in this context.
Figure 7-522: CLI on line help on “status” command usage in this node contex
Figure 7-523: Output of ”status” command in this node context”
Parameter Group Parameter Description
ID Table entry identifier
Active Flag; Indicates if traceroute session is active
Current TTL
Current traceroute session time to live
Current Hops Current number of traceroute hops
Probes
Sent Number of traceroute probes sent
Success
Number of traceroute probes with success
Table 7-487: “status” command - output table parameters
7.6.19 “services” node
This node is used to configure, create and remove services and view traffic statistics information.
/cli/services> tree
+ services[@availableValues, @config, @create, @remove, @show, @showconfig]
+ rate-limiters[@config, @show, @showconfig]
+ statistics[]
+ counters[@availableValues, @show, @show-active, @start, @stop]
+ dhcp[@availableValues, @show]
+ igmp[@availableValues, @show]
Figure 7-524: “services” node tree