Televes OLT 769401 User Manual Download Page 392

Page: 392 / 482

Descripción del producto

392

/cli/remote-eq/onu/t-cont> config ?

Usage:

CONFIG Configure/activate an existing T-CONT on this ONU.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3;

lag.1)

--upstream-dba-profile-id View available Upstream DBA profile IDs in /profiles/

upstream-dba

Figure 7-454: CLI on line help on “config” command usage in this node context

7.6.17.6.10.2 “create” command

Name

create

Description

Add a T-CONT to a specific ONU.

Full path

/remote-eq/onu/t-cont/create

Mandatory Parameters

Screen Output

Table 7-415: “create” command information

/cli/remote-eq/onu/t-cont> create ?

Usage:

CREATE Add a T-CONT to a specific ONU.

[OPTIONAL]

--ID Identifies a table entry by ID, in this context.

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3;

lag.1)

--upstream-dba-profile-id View available Upstream DBA profile IDs in /profiles/

upstream-dba

Figure 7-455: CLI on line help on “create” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands