Televes OLT 769401 User Manual Download Page 208

Page: 208 / 482

Descripción del producto

208

7.6.2.1.1 “files” sub-node

7.6.2.1.1.1 “check” command

Name

check

Description

Calculates MD5SUM for all files to check for inconsistencies.

Full path

/applications/firmware-upgrade/files/check

Mandatory Parameters

This command has no parameters

Screen Output

Table 7-35: “check” command information

/cli/applications> firmware-upgrade/files/check ?

Usage:

CHECK Calculate MD5SUM for all files to check for inconsistencies.

Figure 7-54: CLI on line help on “check” command usage in this node context

7.6.2.1.1.2 “config” command

Name

config

Description

Configures usage by the system of existing configuration files in the repository

Full path

/applications/firmware-upgrade/files/config

Mandatory Parameters

--fileID

Screen Output

Table 7-36: “config” command information

/cli/applications/firmware-upgrade> files/config ?

Usage CONFIG:

CONFIG Configure information for a given file ID.

--fileID Identifies a file by ID, in this context.

[OPTIONAL]

--asw-version Set the active software version for a given file. (STRING 31)

--description Set a description for the specified file. (STRING 47)

--hw-version Set the hardware version for a given file. (STRING 31)

--profileID Identifies a profile by ID.

--set-default Set the default file for the ‘auto’ upgrade option. (true|false)

--sw-version Set the software version for a given file. (STRING 31)

Figure 7-55: CLI on line help on “config” command usage in this node context

7.6.2.1.1.3 “export” command

Name

export

Description

Sends an existing file to a TFTP server.

Full path

/applications/firmware-upgrade/files/export

Mandatory Parameters

--fileID
--ip-address

Screen Output

Table 7-37: “export” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands