Televes OLT 769401 User Manual Download Page 288

Page: 288 / 482

Descripción del producto

288

7.6.10.2.6 “multicast” sub-node

7.6.10.2.6.1 “config” command

Name

config

Description

Configure multicast parameters for the given GPON interfaces.

Full path

/interfaces/gpon/multicast/config

Mandatory Parameters

--port

Screen Output

Table 7-204: “config” command information

/cli/interfaces/gpon/multicast> config ?

Usage CONFIG:

CONFIG Configure multicast parameters for the given PON interfaces.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

[OPTIONAL]

--max-bandwidth Set the multicast group maximum bandwidth in Kbps (unlimited

or 0..100000000000)

--max-groups Set the maximum number of multicast groups (unlimited or

0..16384)

Figure 7-230: CLI on line help on “config” command usage in this node context

7.6.10.2.6.2 “show” command

Name

show

Description

Shows PON multicast information for a specific HW slot.

Full path

/interfaces/gpon/multicast/show

Mandatory Parameters

Screen Output

Table, Figure 7-232.Table parameters description in Table 7-206.

Table 7-205: “show” command information

/cli/interfaces/gpon/multicast> show ?

Usage SHOW:

SHOW Shows PON multicast information for a specific HW slot.

Figure 7-231: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands