Televes OLT 769401 User Manual Download Page 328

Page: 328 / 482

Descripción del producto

328

/cli/multicast/igmp> proxy/config ?

Usage CONFIG:

CONFIG Configure the IGMP proxy.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this

context. (enable|disable)

--client-version Maximum allowed version for the OLT client side.

[2,3]

--max-records-per-report Maximum number of group-records that can be included

in the same membership report. [1..64]

--network-version Maximum allowed version for the OLT network side.

[2,3]

--priority Priority used in the IGMP packets.

--robustness Number of retransmissions sent. Should be adjusted

for the expected packet loss on the network. [1..7]

--unsolicited-report-interval Time interval between repetitions of a host’s initial

group membership report. [1..10]

Figure 7-323: CLI on line help on “config” command usage in this node context

7.6.15.3.2.2 ”show” command

Name

show

Description

Show the current configuration

Full path

/multicast/igmp/proxy/show

Mandatory Parameters

This command has no parameters

Screen Output

Tables, Figure 7-325. Table parameters description, Table 7-289.

Table 7-288: “show” command information

/cli/multicast/igmp/proxy> show ?

Usage:

SHOW Show the current configuration

Figure 7-324: CLI on line help on “show” command usage in this node context

Figure 7-325: Output of ”show” command in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands