Televes OLT 769401 User Manual Download Page 125

Page: 125 / 482

125

To save a System Database Backup file to a PC, Figure 5-98:

The user must press the System Database Backup file link in the Local Backup table list, 1, and a Save As dialog box will pop

up will appear.

The filed File name is automatically filled with the System Database Backup file name, 2; this name can be changed by typing

in the desired name

Finalize by Pressing the “Save” button, 2, will save the Database in the OLT file system.

Figure 5-98: Save a Database Backup file to a PC

To add a database stored in the PC, Figure 5-99:

Press the Add button,1, and the “Send the Local Backup” dialog Box will appear:

Pressing the empty field, 2, the “Choose file to Upload” dialog box will appear allowing the selection of a file, from a

repository, to upload to the OLT

Select the file to upload, 3 and 4

Finish the upload, by pressing the ADD button, 5.

The file will then be available at the Local Backups Table, Figure 5-100.

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands