Televes OLT 769401 User Manual Download Page 232

Page: 232 / 482

Descripción del producto

232

7.6.5.2 “dhcp-services” sub-node

7.6.5.2.1 “config” Command

Name

config

Description

Configure DHCP parameters for a given service.

Full path

/dhcp/dhcp-services/config

Mandatory Parameters

--serviceID

Screen Output

Table 7-87: “config” command information

/cli/dhcp/dhcp-services> config ?

Usage CONFIG:

CONFIG Configure DHCP parameters for a given service.

--serviceID Select an OLT service by ID.

[OPTIONAL]

--broadcast-flag Configure the Broadcast flag for DHCP Discover and request

messages (transparent|force-set|force-clear)

--circuit-id-str template string for circuit-id (STRING 255)

--dhcp-op18 Enable or disable the DHCP Op.18 (enable|disable)

--dhcp-op37 Enable or disable the DHCP Op.37 (enable|disable)

--dhcp-op82 Enable or disable the DHCP Op.82 (enable|disable)

--eth-priority pbit value in the DHCP packets (0=<n=<7)

--use-global If enabled, this service will use the global circuit-id string

(enable|disable)

Figure 7-109: CLI on line help on “config” command usage in this node context

7.6.5.2.2 “show” command

Name

show

Description

Show DHCP services information.

Full path

/dhcp/dhcp-services/show

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-111.Table parameter description in Table 7-89.

Table 7-88: “show” command information

/cli/dhcp/dhcp-services> show ?

Usage:

SHOW Show DHCP services information.

Figure 7-110: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands