Televes OLT 769401 User Manual Download Page 459

Page: 459 / 482

459

/cli/users> config ?

Usage:

CONFIG Configure an existing user login.

--change-passwd[=STRING] Trigger a password change

--login User’s login

[OPTIONAL]

--auto-removal

User’s auto-removal (enable|disable)

--expire-time

User’s expire time (hours)

--permissions

User’s permissions

--renew Renew expired user (enable)

Figure 7-590: CLI on line help on “config” command usage in this node context

7.6.21.2 “create” command

This command is only available for users with administrator’s permissions.

Name

create

Description

Create a new user login.

Full path

/users/create

Mandatory Parameters

--login
--permissions

Screen Output

Table 7-552: “create” command information

/cli/users> create ?

Usage:

CREATE Create a new user login.

--login User’s login

--permissions

User’s permissions

[OPTIONAL]

--auto-removal

User’s auto-removal (enable|disable)

--expire-time

User’s expire time (hours)

Figure 7-591: CLI on line help on “create” command usage in this node context

7.6.21.3 “remove” command

This command is only available for users with administrator’s permissions.

Name

remove

Description

Remove an existing user login

Full path

/users/remove

Mandatory Parameters

--login

Screen Output

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands