Televes OLT 769401 User Manual Download Page 306

Page: 306 / 482

Descripción del producto

306

7.6.11.3.1.2 “show” command

This command displays general information on the system configuration, indicating the interfaces available in the system for inBand configuration

and showing current InBand configuration.

Name

show

Description

Show the current configuration.

Full path

/ip/interfaces/inband/show

Mandatory Parameters

This command has no parameters

Screen Output

Tables Figure 7-271.Table parameters description inTable 7-242

Table 7-241: “show” command information

/cli/ip/interfaces/inband> show ?

Usage:

SHOW Show the current configuration

Figure 7-270: CLI on line help on “show” command usage in this node context

Figure 7-271: Output of ”show” command in this node context

Parameter

Description

Slot

Slot number of the uplink interface (not applicable for LAG)

Port

Interface (or LAG)

Inband

Indicates if the interface is used or not to manage the system, YES if in use.

Table 7-242: show command “output” table parameters

7.6.11.3.1.3 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/ip/interfaces/inband/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-243: “showconfig” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands