Televes OLT 769401 User Manual Download Page 371

Page: 371 / 482

371

Full path

/remote-eq/onu/e1/show

Mandatory Parameters

Screen Output

Table

Table 7-376: “show” command information

//cli/remote-eq/onu/e1> show ?

Usage:

SHOW Show all the current E1 interfaces configuration for a given ONU.

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-415: CLI on line help on “show” command usage in this node context

7.6.17.6.4.5 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/remote-eq/onu/e1/showconfig

Mandatory Parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-377: “showconfig” command information

cli/remote-eq/onu/e1> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-416: CLI on line help on “showconfig” command usage in this node contex

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands