Televes OLT 769401 User Manual Download Page 351

Page: 351 / 482

351

Parameter

Description

Parameter

Identifies parameter by name

Value

Indicates parameter value

Meaning

Short description for each parameter value

Table 7-335: availableValues command - output table parameters

7.6.16.6.1.2 “config” command

Name

config

Description

Configure voip server profiles.

Full path

/profiles/voip/server/config

Mandatory Parameters

--profileID

Screen Output

Table 7-336: “config “command information

/cli/profiles/voip/server> config ?

Usage:

CONFIG Configure

--profileID

Identifies a profile by ID.

[OPTIONAL]

--admin

Administrative State. Enable/disable, in this context.

(enable|disable)

--gw-ip

IPv4 address for the default GW

--name

Insert a name STRING.

--server-ip

IPv4 address for the VoIP server

--server-port

The VoIP server port

--voice-gw

The Voice Gateway to choose. (see ‘availableValues’) (1..5)

Figure 7-373: CLI on line help on “config” command usage in this node context

7.6.16.6.1.3 “create” command

Name

create

Description

Create a voip server profile

Full path

/profiles/ voip/server/create

Mandatory Parameters

Screen Output

Table 7-337: “create” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands