Televes OLT 769401 User Manual Download Page 222

Page: 222 / 482

Descripción del producto

222

7.6.2.4.2.4 showconfig” command

Name

showconfig

Description

Prints the command list that enforces the current configuration.

Full path

/applications/time/time-zone/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-66: “showconfig” command information

/cli/applications> time/time-zone/showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-86: CLI on line help on “showconfig” command usage in this node context

7.6.3 “backup-manager” node

7.6.3.1 “create” command

Name

create

Description

Creates a new backup file from the current system state.

Full path

/backup-manager/create

Mandatory Parameters

Screen Output

Table 7-67: “create” command information

/cli/backup-manager> create ?

Usage:

CREATE Creates a new backup file from the current system state.

[OPTIONAL]

--description Set a description for the new backup file. Cannot be modified later.

(STRING 63)

Figure 7-87: CLI on line help on “create” command usage in this node context

7.6.3.2 “del-serv-conf” command

Name

del-serv-conf

Description

Delete the Service configuration. Resets to factory settings.

Full path

/backup-manager/del-serv-conf

Mandatory Parameters

This command has no parameters

Screen Output

Table 7-68: “del-serv-conf” command information

/cli/backup-manager> del-serv-conf ?

Usage:

DEL-SERV-CONF Delete the Service configuration. Resets to factory settings.

Figure 7-88: CLI on line help on “del-serv-conf” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands