Televes OLT 769401 User Manual Download Page 359

Page: 359 / 482

359

7.6.17.5 “discovery” sub-node

7.6.17.5.1 “change-reg-type” command

Name

change-reg-type

Description

Modify the register type for a single ONU.

Full path

/remote-eq/discovery/change-reg-type

Mandatory Parameters

--onuID
--port
--register-type

Screen Output

Table 7-353: “change-reg-type” command information

/cli/remote-eq/discovery> change-reg-type ?

Usage:

CHANGE-REG-TYPE Modify the register type for a single ONU.

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--register-type Set the ONU registration type. (serial-number|password|both)

[OPTIONAL]

--password Set the password for ONU registration. Up to 10 ASCII characters

or precisely 20 in HEX format (STRING 20)

--serial-number Set the serial number for ONU registration (STRING 16)

Figure 7-391: CLI on line help on “change-reg-type” command usage in this node context

7.6.17.5.2 “command” command

Name

command

Description

Send one command to a specific ONU.

Full path

/remote-eq/discovery/command

Mandatory Parameters

--type

Screen Output

Table 7-354: “command” command information

/cli/remote-eq/discovery> command ?

Usage:

COMMAND Send one command to a specific ONU.

--type Send ITU-T G.984.3 ‘Disable_Serial_Number’ or ONU MIB re-synch.

command. (disable-sn|enable-sn|resynch|forced-resynch)

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-392: CLI on line help on “command” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands