Televes OLT 769401 User Manual Download Page 336

Page: 336 / 482

Descripción del producto

336

7.6.16.1 “dscp-to-pbits” sub-node

7.6.16.1.1 “config” command

Name

config

Description

Configure/activate an existing profile.

Full path

/profiles/dscp-to-pbits/config

Mandatory Parameters

--ID

Screen Output

Table 7-303: “config” command information

/cli/profiles/dscp-to-pbits> config ?

Usage CONFIG:

CONFIG Configure/activate an existing profile.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--dscp Specify the DSCP value (0..63). Ranges are accepted (eg. 0-7,10,20)

--name Define a name for the specified profile.

--p-bits Define the P-bits value (0..7).

Figure 7-340: CLI on line help on “config” command usage in this node context

7.6.16.1.2 “create” command

Name

create

Description

Create a new profile that assigns DSCP to P-bits

Full path

/profiles/dscp-to-pbits/create

Mandatory Parameters

Screen Output

Table 7-304: “create” command parameters

/cli/profiles/dscp-to-pbits> create ?

Usage CREATE:

CREATE Create a new profile that assigns DSCP to P-bits.

[OPTIONAL]

--ID Identifies a table entry by ID, in this context.

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--dscp Specify the DSCP value (0..63). Ranges are accepted (eg. 0-7,10,20)

--name Define a name for the specified profile.

--p-bits Define the P-bits value (0..7).

Figure 7-341: CLI on line help on “create” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands