Televes OLT 769401 User Manual Download Page 195

Page: 195 / 482

195

7.6.1.7 “network-service” sub-node

7.6.1.7.1 “add” command

Name

add

Description

Associate a given Network Service to an ACL.

Full path

/acl/network-service/add

Mandatory Parameters

--acl-id
--serviceID

Screen Output

Table 7-14: “add” command information

/cli/acl/network-service> add ?

Usage:

ADD Associate a given Network Service to an ACL

--acl-id Identifies an ACL by ID, in this context.

--serviceID Select an OLT service by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context. (enable|disable)

--direction Identifies an ACL Rule by ID, in this context.

Figure 7-32: CLI on line help on “add” command usage in this node context

7.6.1.7.2 “config” command

Name

config

Description

Configure an existing Network Service association.

Full path

/acl/network-service/config

Mandatory Parameters

--acl-id
--serviceID

Screen Output

Table 7-15: “config” command information

/cli/acl/network-service> config ?

Usage:

CONFIG Configure an existing Network Service association

--acl-id Identifies an ACL by ID, in this context.

--serviceID Select an OLT service by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context. (enable|disable)

--direction Identifies an ACL Rule by ID, in this context.

Figure 7-33: CLI on line help on “config” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands