Televes OLT 769401, User Manual

Page: 304 / 482

Descripción del producto
304
Figure 7-265: Output of ”show” command in this node context
Parameter Group Parameter Description
ID
Indicates the LAG Identifier (number)
Name Indicates the LAG Name
Admin
Indicates the LAG Administrative State.
Link Status
If at least one of the LAG members is up, the status is Up, otherwise is
Down
Channel Type
Indicates if the LAG is Static, in this case it doesn’t process or send
LACPDUs, or it’s Dynamic, in this case it processes and send’s LACPDUs
Underlying Interfaces
Slot/port
Indicates the Ports (identified by the pair slot/port) that belong to the
LAG
Status Indicates if the status of the ports in the LAG (Active | Inactive)
Table 7-237: “show” command output table parameters
7.6.11 “ip” node
/cli/ip> tree
+ ip[@apply, @save]
+ interfaces[]
+ inband[@config, @show, @showconfig]
+ ip[@config, @show, @showconfig]
+ networking[@config, @show, @showconfig]
+ route[@create, @remove, @show, @showconfig]
Figure 7-266: “ip” node tree
7.6.11.1 “apply” command
Name apply
Description Will apply to the HW the last saved IP configuration..
Full path /ip/apply
Mandatory Parameters
This command has no parameters.
Screen Output
No
Table 7-: “apply” command information